Feeders

The BF66 big bale feeder minimizes hay loss. As the animals consume the forage, the 6-foot section slides forward toward the center until the bale is gone. A tractor isn't necessary to move the BF66. With the use of 4 linking rods, the feeder can be disassembled and moved to another bale. BF66 is safer for sheep and goats than brands that cradle the hay off the ground. Those feeders can cause injuries and death. BF66 also wastes less hay and keeps animals cleaner. BF66 feeds 12 to 24 head. BF66 is available in two different styles: horizontal bars for horned animals (top) and verticle bars for polled animals (bottom).

This easy-to-move feeder comes standard with 10-inch pneumatic wheels with bearings and locks on two. F1330 conserves feed and minimizes hay loss. The hay rack slopes inwad so that all the leaves fall into the trough instead of being lost. The hay rack is constructed out of 3/8 inch solid rod on 3 ½-inch centers. The trough is 5 inches deep with a heavy 14-gauge galvanized bottom. F1330 had adjustable legs so the trough height can be varied for different size animals. The feeder is assembled with 12 bolts. It feeds 10 to 18 sheep and/or goats.

This feeder is made of very corrosion resistant aluminum. Feeder's hay rack and clamp-on brackets are made out of painted steel. Brackets will clamp securely on wood or steel fencing from ¾-inch to 1 ¾-inch thick. Feeder's brackets can be bolted at different settings to change height of feeder. Feeds 4 head.

The F1310 is a 4-foot version of the F1330 with a higher hay rack. The feeder comes standard with 10-inch pneumatic wheels at one end for ease of moving. Feeder bottom is 20 gauge galvanized steel. The feeder requires only 4 bolts to assemble.

H600 is a 6-sided combination feeder with a drop-in poly tub that is sturdy and easy to clean. The feeder is constructed out of heavy wall pipe and sold rounds. H600 is the least expensive way to feed 12 head of sheep and/or goats. Hexagon feeders take up less barn space and are flexible in use. They're especially easy to move and store, stacking one inside another.

MF1 and MF2 are one-piece molded poly feeders with a heavy steel base. They turn with the wind to keep the contents dry. MF1 holds approximately 50 pounds and MF2 holds 20 pounds of premix. The top edge of the feeder on MF1 is 15 inches. MF2 is 13 inches off the ground.

Our hay basket easily hangs on a fence or rail. Baskets fit 1 to 2 sections of hay and can be stacked together for easy storage. Basket is made of 5/16-inch solid round rod.

Finally, a grain feeder for both lambs/kids and mature animals! This 8-foot adjustable grain feeder has a 14-gauge trough. The trough and top rail can be adjusted low for small kids lambs and higher for mature animals. It's ideal for growing and finishing lambs and kids and flushing ewes and does on pasture. Sheep and goats can feed from both sides. The top rail makes a nice handle for easy carrying. The rail also keeps animals out of the feed trough.

This one sided 50 pound self feeder has a lid and can be hung on a fence or rail up to 1 ½ -inch wide. Feeder is made of 14 gauge sheet steel. Feeds from 8 to 15 lambs or kids.

This 2 sided self feeder holds approximately 125 pounds of feed. Feeder is free standing and has 4 adjustable legs to change height of feeder. Feeder has lid and easy carry handles. Feeder is made from 14 gauge sheet steel. Feeders from 20 to 35 lambs or kids.

Fenceline feeders come in 8-foot sections and can be extended in 8-foot increments. The F1316 starter unit comes with a bunk, hay rack, and a right and left end. The F1317 add-on unit comes with a bunk, hay rack, and spacer. Feeders have adjustable legs, flip-open ends for easy clean out, and full sheet metal backing. Hay racks have large hay capacity similar to a double-sided feeder. All feeders' sheet metal is galvanized, then painted for longer life. Feeders have solid portion above hay slots to stop animals from eating over the top.

This single animal hay and grain feeder is ideal for lambing/kidding jugs or any pen with one animal. Feeder is constructed from 14-gauge sheet steel with hooks to hook on up to 1 ½ inches thick.

Feeder panels come in 2 different styles: horizontal bars for horned animals or vertical bars (pictured here) for non-horned animals. Panels can be connected together for a long run.

These 1-foot, 2-foot, 3-foot, and 4-foot poly show troughs and 1-foot deep feeder have steel hangers on the back for easy attachment to panels and fences. They're easy to clean, ideal for shows and sales.